Paper
1 May 1994 Diagnostic monitoring procedure for automated measurement systems
Robert R. Hershey, Richard C. Elliott
Author Affiliations +
Abstract
This paper describes a new method for monitoring the performance of metrology systems. The objective of the technique is to both identify deviant performance and estimate the likely cause. The method is driven by the assumption that all variation in a measurement system is systematic until proven random. This assumption in turn guides the choice of sampling plan and analysis to extract the maximum amount of information possible from a given number of measurements. Diagnostic capability is achieved by selecting a sampling plan which yields data for estimates of all known error modes of the instrument. Consequently, somewhat larger sampling plans are required and the technique is generally more appropriate for automated measurement systems. The concept is illustrated by example using automated scanning electron microscopes used for critical dimension measurement in the semiconductor manufacturing process. Experimental results illustrating the response of the monitor to programmed deviation are presented.
© (1994) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert R. Hershey and Richard C. Elliott "Diagnostic monitoring procedure for automated measurement systems", Proc. SPIE 2196, Integrated Circuit Metrology, Inspection, and Process Control VIII, (1 May 1994); https://doi.org/10.1117/12.174133
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diagnostics

Data analysis

Electron microscopes

Error analysis

Metrology

Scanning electron microscopy

Semiconductor manufacturing

RELATED CONTENT

Key points to measure accurately an ultra low LER by...
Proceedings of SPIE (April 18 2013)
Limits of model-based CD-SEM metrology
Proceedings of SPIE (September 19 2018)
Metrology models and simulation
Proceedings of SPIE (July 01 1994)
Reference metrology using a next-generation CD-AFM
Proceedings of SPIE (May 24 2004)

Back to Top