Paper
12 April 1995 Continuous and shutterless hologram movie
Joseph C. Palais, Mark E. Miller
Author Affiliations +
Proceedings Volume 2406, Practical Holography IX; (1995) https://doi.org/10.1117/12.206233
Event: IS&T/SPIE's Symposium on Electronic Imaging: Science and Technology, 1995, San Jose, CA, United States
Abstract
This paper presents a unique approach to the production and display of a hologram movie. Motion was provided by rotating a 3D object in steps between exposures. Strip holograms were made on 70 mm AGFA 8E75 Holotest roll film. Each hologram was about 11 mm high and 55 mm wide. The object was rotated two degrees, while the film was advanced, between successive exposures. A complete rotation of the object was recorded on 180 holograms using the lensless Fourier-transform construction. The ends of the developed film were spliced together to produce a continuous loop. Although the film moves continuously on playback and there is no shutter, there is no flicker or image displacement because of the Fourier-transform hologram construction. The movie can be viewed for as long a time as desired because the object motion is cyclical and the film is continuous. The film is wide enough such that comfortable viewing with both eyes is possible, enhancing the 3D experience. Viewers can stand comfortably away from the film since no viewing slit or aperture is necessary. Several people can view the movie at the same time. Speckle is reduced due to the film motion.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joseph C. Palais and Mark E. Miller "Continuous and shutterless hologram movie", Proc. SPIE 2406, Practical Holography IX, (12 April 1995); https://doi.org/10.1117/12.206233
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Holograms

Holography

3D image reconstruction

Fourier transforms

Camera shutters

Eye

3D image processing

RELATED CONTENT


Back to Top