Paper
19 June 1995 In-situ ultrasonic inspection of submarine shaft seal housing for corrosion damage
Narendra K. Batra, Henry H. Chaskelis, Richard B. Mignogna
Author Affiliations +
Abstract
The interior of the housings of primary and backup shaft seals of 637 class submarines are exposed to sea water during service and become corroded during service. Corrosion damage evaluation requires disassembly of the housing and visual inspection. In this paper, we present quantitative results of in situ nondestructive ultrasonic technique developed for the inspection of the seal housings. Due to vast variations in velocity in the seal material, the velocity was determined at suitable sites not subjected to corrosion and of known thickness from the blueprints. Using this normalized velocity and measured time-of-flight, we determined the thickness of the seal housing at various locations on the circumference. Subsequent mechanical thickness measurements, made when the housings were removed from service, agreed within the predicted uncertainty of 1.5% of ultrasonic measurements. This technique for the assessment of corrosion damage saves time and money, by preventing premature disassembly and downtime for the submarine.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Narendra K. Batra, Henry H. Chaskelis, and Richard B. Mignogna "In-situ ultrasonic inspection of submarine shaft seal housing for corrosion damage", Proc. SPIE 2459, Nondestructive Evaluation of Aging Maritime Applications, (19 June 1995); https://doi.org/10.1117/12.212550
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Corrosion

Ultrasonics

Inspection

Epoxies

Velocity measurements

Optical inspection

Calibration

Back to Top