Scanned-beam x-ray source technology for photon backscatter imaging technique of mine detection: advanced technology research

Charlotte M. Burchanowski; Robert B. Moler; Steve L. Shope

doi:10.1117/12.211332

20 June 1995 Scanned-beam x-ray source technology for photon backscatter imaging technique of mine detection: advanced technology research

Charlotte M. Burchanowski, Robert B. Moler, Steve L. Shope

Author Affiliations +

Proceedings Volume 2496, Detection Technologies for Mines and Minelike Targets; (1995) https://doi.org/10.1117/12.211332
Event: SPIE's 1995 Symposium on OE/Aerospace Sensing and Dual Use Photonics, 1995, Orlando, FL, United States

Abstract

A very high power, state-of-the-art, scanning x-ray source has been developed for use with an x-ray backscatter system that detects and images buried land mines. This paper describes the distinctive qualities of the x-ray source technology necessary to prove the feasibility of the mine detection technique in the field. The imaging system requires that an x-ray beam, having a nominal illumination area on the ground of two centimeters by two centimeters, sweeps across a width of three meters in a time of 15 milliseconds or less. The source must produce an integrated flux of 10⁶ x-rays (min) at 120 kVp (min) for each pixel. The source technology is based on a plasma-focused electrom beam operating up to 140 kilovolts with a current of 0.7 ampere. The electrom beam is magnetically shaped to form a thin ellipse with dimensions of approximately one millimeter by ten millimeters. The scanner is designed to run continuously with target temperature of 160 degrees F (max). The overall design allows the scanner to run with operational and auxilary power generators in the field. A unique 400 hertz, 440 volt, 3-phase, SCR-controlled, low energy storage DC source, with low ripple and 1% voltage regulation, supplies the scanner with 100 kilowatts of power at up to 160 kilovolts. The uniqueness of the mine detection technique and scanner design limits radiation hazards: 1) focusing and tight collimation minimizes stray x-rays; 2) the x-rays travel directly into the ground and are mostly absorbed; 3) radiation leakage from the source is not permitted; and 4) backscatter radiation is strongly localized around the irradiation area, is directed upward, and has a small angular distribution.

Citation Download Citation

Charlotte M. Burchanowski, Robert B. Moler, and Steve L. Shope "Scanned-beam x-ray source technology for photon backscatter imaging technique of mine detection: advanced technology research", Proc. SPIE 2496, Detection Technologies for Mines and Minelike Targets, (20 June 1995); https://doi.org/10.1117/12.211332

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available