Paper
3 July 1995 Development of EB lithography system for next generation photomasks
Tadashi Komagata, Hitoshi Takemura, Nobuo Gotoh, Kazumitsu Tanaka
Author Affiliations +
Abstract
A higher quality electron beam (EB) mask lithography system is now required in an advanced field aimed at 1 Gbit DRAM chips. For this purpose, photomask accuracies of 0.03 micrometers to 0.02 micrometers are needed, for the feasibility of an EB lithography system with these accuracy levels is discussed. The error sources of a commercial EB lithography system with a variable shaped beam system and step and repeat writing strategy are examined. The development plans to minimize these errors are described and early results, specifically the field stitching error, obtained from these developments are shown. The mean stitching error was +/- 0.023 micrometers and the random stitching error was +/- 0.030 micrometers . From the analysis of error budget, it is shown that a field stitching accuracy level of 0.02 micrometers will be attainable after the completion of above-mentioned development plans.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tadashi Komagata, Hitoshi Takemura, Nobuo Gotoh, and Kazumitsu Tanaka "Development of EB lithography system for next generation photomasks", Proc. SPIE 2512, Photomask and X-Ray Mask Technology II, (3 July 1995); https://doi.org/10.1117/12.212763
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Distortion

Error analysis

Photomasks

Lithography

Beam shaping

Calibration

Electron beams

RELATED CONTENT


Back to Top