Paper
27 November 1996 In-situ measurements using an Optical Fiber Array Fluorosensor
Robert G. Milne, Daniel McStay, Patricia M. Pollard
Author Affiliations +
Abstract
The use of an in-situ optical fiber array system in conjunction with a dye tracer for monitoring the production water discharge from an oil platform in the North Sea is reported. The dye tracer properties mimic those of the produced water. The optical fiber array fluorosensor is capable of detecting fluorescent dye tracer particles down to 2.5 multiplied by 106 p/l. The optical fiber array fluorosensor was able to detect the dye tracer plume from the produced water effluent discharge of the CLYDE platform approximately 100 m from the platform, but was unable to detect tracer further away from the platform. The results suggest that the produced water dilution is greater than previously believed. The use of these combined techniques is shown to be a feasible method for production water monitoring.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert G. Milne, Daniel McStay, and Patricia M. Pollard "In-situ measurements using an Optical Fiber Array Fluorosensor", Proc. SPIE 2838, Distributed and Multiplexed Fiber Optic Sensors VI, (27 November 1996); https://doi.org/10.1117/12.259813
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Water

Optical fibers

Optical arrays

Luminescence

Pollution

Ocean optics

Particles

RELATED CONTENT

Printed transistors for ocean sensing
Proceedings of SPIE (January 01 1900)
Ocean optics: a perspective and a prognosis
Proceedings of SPIE (February 06 1997)
Diver-Operable Multiwavelength Radiometer
Proceedings of SPIE (November 15 1979)

Back to Top