Paper
11 November 1996 Star sensor baffle optimization: some helpful practical design rules
Jean-Jacques P. Arnoux
Author Affiliations +
Abstract
The performance of a star sensor is often limited by the stray light level on the detector and by non-uniformity and slopes of the corresponding irradiance. One of the major contributors to this unwanted noise is the baffle, which is frequently designed as a single equipment: its geometry is derived using simple rule to block first and second level scattering of stray light flux coming from external sources at off-axis positions defined by the mission. The geometry of the baffle is constrained by mechanical engineering requirements which confine its overall dimension. Better system performances are obtained when the early design of the baffle can take into account the angular response of the camera.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jean-Jacques P. Arnoux "Star sensor baffle optimization: some helpful practical design rules", Proc. SPIE 2864, Optical System Contamination V, and Stray Light and System Optimization, (11 November 1996); https://doi.org/10.1117/12.258324
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Stray light

Star sensors

Sensors

Sun

Signal attenuation

Scattering

Light scattering

Back to Top