Paper
30 September 1996 Influence of thermal deformation and shielding gas on topography of weld in deep-penetration laser welding
Hongliang Qiang, Zhaogu Cheng, Jiangtao Luo, Gang Chen, Runwen Wang
Author Affiliations +
Abstract
The thermal deformation in penetration welding with a laser has been investigated as a factor which results in the elevation on the surface of the weld. Qualitative analysis of the course of thermal deformation during which elevation is made has been presented in detail. A series of comparison laser welding experiments was done with a 5kW CO2 laser. The experimental results showed that there were always a slight warp and a lateral shrinking of the workpiece together with the elevation on the surface, which had been predicted by the analysis. The influence exerted by shielding gas on the topography of the weld has also been discussed. The shielding gas is supposed to affect the pressure above the surface of the welding pool. The shape of the surface of the welding pool is determined by the difference between pressures on both sides of the surface in term of Laplace equation. When the distribution of the gas pressure was homogeneous within the range of the welding pool, a fairly smooth topography was experimentally obtained. Otherwise, obvious ripples were observed along the weld.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hongliang Qiang, Zhaogu Cheng, Jiangtao Luo, Gang Chen, and Runwen Wang "Influence of thermal deformation and shielding gas on topography of weld in deep-penetration laser welding", Proc. SPIE 2888, Laser Processing of Materials and Industrial Applications, (30 September 1996); https://doi.org/10.1117/12.253135
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser welding

Laser processing

Gas lasers

Carbon monoxide

High power lasers

Liquids

Metals

RELATED CONTENT

A critical review of laser beam welding
Proceedings of SPIE (March 08 2005)
Laser processing with high-power gas lasers
Proceedings of SPIE (March 31 1995)
Mass And Heat Transfer In Deep Penetration Laser Welding
Proceedings of SPIE (September 22 1987)
LaserHybrid welding for industrial applications
Proceedings of SPIE (April 26 2007)

Back to Top