Method to improve setup and overlay performance on an excimer laser stepper using a unique DUV resist: KRS

Karen E. Petrillo; James Brancaccio; Wu-Song Huang; Ranee W. Kwong; Ahmad D. Katnani

doi:10.1117/12.275794

7 July 1997 Method to improve setup and overlay performance on an excimer laser stepper using a unique DUV resist: KRS

Karen E. Petrillo, James Brancaccio, Wu-Song Huang, Ranee W. Kwong, Ahmad D. Katnani

Author Affiliations +

Proceedings Volume 3048, Emerging Lithographic Technologies; (1997) https://doi.org/10.1117/12.275794
Event: Microlithography '97, 1997, Santa Clara, CA, United States

Abstract

Accurate stepper setup is essential for getting good overlay performance on product wafers. As part of a typical stepper setup procedure, one or more wafers are exposed, developed, aligned to the initial exposure, and then exposed again in order to determine the x/y baseline position and grid rotation. By removing the wafer from the chuck for processing (baking and development) before the alignment and exposure, both pre-aligner and stage errors are introduced. If the alignment and second exposure could be made without removing the wafer from the stepper chuck, these two sources of error could be eliminated. This is possible if the resist has a strong and immediate latent image after exposure.

Citation Download Citation

Karen E. Petrillo, James Brancaccio, Wu-Song Huang, Ranee W. Kwong, and Ahmad D. Katnani "Method to improve setup and overlay performance on an excimer laser stepper using a unique DUV resist: KRS", Proc. SPIE 3048, Emerging Lithographic Technologies, (7 July 1997); https://doi.org/10.1117/12.275794

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE