Paper
31 March 1998 Detection of interlaminar corrosion in riveted thin aluminum skins
Qin Geng, Walter P. T. North
Author Affiliations +
Abstract
The fuselage of an aircraft is made by rivetting thin aluminum skins to the sub structure which is then exposed to the environmental elements. Moisture can penetrate between these aluminum surfaces causing inter laminar corrosion. This research describes an optical procedure to inspect large areas of quasi flat surfaces in order to identify areas of suspected inter laminar corrosion followed by a focussed ultrasonic test in the suspected area to confirm the inter laminar corrosion. After a contour scan of the offending are to determine the resulting contour amplitude an FEA model of the area was used to estimate the stress in the aluminum skin.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qin Geng and Walter P. T. North "Detection of interlaminar corrosion in riveted thin aluminum skins", Proc. SPIE 3397, Nondestructive Evaluation of Aging Aircraft, Airports, and Aerospace Hardware II, (31 March 1998); https://doi.org/10.1117/12.305060
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Corrosion

Skin

Aluminum

Inspection

Ultrasonics

Finite element methods

3D modeling

Back to Top