Paper
7 April 1999 ArF radiation resistance of optical coatings on CaF2 in relation to the surface finish of the substrate
Author Affiliations +
Abstract
CaF2 has received increasing attention as a promising substrate for coatings in the VUV range. Optimization of the optical properties of these optical components requires the study of basic characteristics of the coated and uncoated CaF2 substrates such as surface roughness, optical performance, absorption and scatter losses, and laser induced damage threshold. The investigations have revealed the influence of different substrate polishing grades on the quality of AR-193nm -and HR-193nm/0 degrees coated samples. LIDT values at the ArF-excimer laser wavelength were measured as high as 5.6 J/cm2 and 4.6 J/cm2 for the best AR- and HR-coated samples, respectively.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Roland Thielsch, Joerg Heber, Angela Duparre, Norbert Kaiser, Klaus R. Mann, and Eric Eva "ArF radiation resistance of optical coatings on CaF2 in relation to the surface finish of the substrate", Proc. SPIE 3578, Laser-Induced Damage in Optical Materials: 1998, (7 April 1999); https://doi.org/10.1117/12.344385
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polishing

Scattering

Optical coatings

Reflectivity

Surface finishing

Absorption

Surface roughness

RELATED CONTENT


Back to Top