Paper
19 March 1999 Single and coupled silicon Fabry-Perot filters for WDM channel monitoring
Author Affiliations +
Abstract
Operation and management of Wavelength Division Multiplexing (WDM) systems require the monitoring of optical channel frequency and power. In this paper we propose a simple and low-cost solution for tracking the frequency of WDM channels, based on the thermo-optic tuning of single or coupled-cavities Fabry-Perot silicon optical filters. The fabricated structures are single-cavity filters exhibiting, thanks to a suitable coating stack on both cavity sides, high finesse and narrow bandwidth. Moreover, the free spectral range is large compared to the channel spacing, allowing the monitoring of one carrier frequency at a time. By means of a heater we change the cavity refractive index and move the transmission peaks, thus scanning the WDM frequency set. In particular, we demonstrate the possibility to resolve up to seven 50-GHz-spaced channels, with a crosstalk of -10 dB, at wavelengths around 1550 nm. Better performances, in terms of resolvable channels and cross-talk can be obtained by using two coupled-cavities, having a common resonance peak and different free spectral ranges. The global optical transfer function of such a cascade shows only one transmission peak in a frequency range of about 30 nm, and can be thermally tuned in this range.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Giuseppe Cocorullo, Francesco G. Della Corte, Mario Iodice, and Ivo Rendina "Single and coupled silicon Fabry-Perot filters for WDM channel monitoring", Proc. SPIE 3630, Silicon-based Optoelectronics, (19 March 1999); https://doi.org/10.1117/12.342800
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Coating

Silicon

Mirrors

Optical filters

Fabry–Perot interferometers

Refractive index

Wavelength division multiplexing

Back to Top