Paper
16 August 2000 Design of a convex and camera mirror support system for Altair, the Gemini-North adaptive optics system
Author Affiliations +
Abstract
The Convex Camera Structure (CCS) is a welded Invar structure that supports of the final two optical elements in the Altair science path. The CCS assembly holds the large camera mirror, a 295 mm diameter off-axis conic, in close relation with the smaller convex mirror, a 146 mm diameter off-axis conic. The image quality requirement imposed stringent spatial tolerance between the two mirrors: +/- 45 micrometers in axial separation, +/- 70 micrometers in decenter and +/- 30 arcsecond in allowable tilt. These tolerances include contributions from initial alignment error, geometrical and dimensional changes due to gravity and temperature. This paper gives an overview of the CCS and its associated components. Flexures are integral part of the CCS assembly, they are utilized to connect the CCS to the aluminum main optical bench, the mirror to the six degree- of-freedom mount, and the 6DOF mount to the CCS end plate. The design considerations and engineering analyses of the CCS assembly are outlined.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kei Szeto, Scott C. Roberts, Andre Anthony, Joeleff T. Fitzsimmons, Robert Gaunt, Jerry Sebesta, and Jean-Pierre Veran "Design of a convex and camera mirror support system for Altair, the Gemini-North adaptive optics system", Proc. SPIE 4008, Optical and IR Telescope Instrumentation and Detectors, (16 August 2000); https://doi.org/10.1117/12.395416
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Cameras

Temperature metrology

Mirror mounts

Assembly tolerances

Off axis mirrors

Optical benches

RELATED CONTENT

Alignment of the ESPRESSO Coudé train on the ESO VLT
Proceedings of SPIE (July 22 2016)
Design and performance of a Prime focus camera for the...
Proceedings of SPIE (September 12 2021)
Image Parameters Of Large Multi-Component Mirrors
Proceedings of SPIE (February 21 1986)
Optics of the instrument Elmer for the GTC 10 m...
Proceedings of SPIE (March 07 2003)

Back to Top