Paper
6 July 2000 Packing effect on latex film formation and dissolution: a UV-to-visible study
Onder M. Pekcan, Ertan Arda
Author Affiliations +
Abstract
Films with various thicknesses were formed from pyrene labeled poly (methyl methacrylate) (PMMA) high Tg latex particles, sterically stabilized by poly isobutylene. Annealing of films were performed above Tg at elevated temperatures up to 270 degree(s)C for 30 min time intervals. UV- Visible technique was used for monitoring of film formation and dissolution. Absorption of chloroform molecules into the annealed latex film was followed by diffusion of PMMA chains into solvent reservoir. Diffusion coefficients of PMMA chains were measured and found to be in between 2.6 x10- 9 cm2 s-1 to 9.7 x 10-13 cm2 s-1 for the latex films in various thicknesses. It was observed that thicker films dissolved much faster than the thinner films.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Onder M. Pekcan and Ertan Arda "Packing effect on latex film formation and dissolution: a UV-to-visible study", Proc. SPIE 4129, Subsurface Sensing Technologies and Applications II, (6 July 2000); https://doi.org/10.1117/12.390628
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Latex

Polymers

Particles

Diffusion

Annealing

Polymer thin films

Polymethylmethacrylate

Back to Top