Paper
14 June 2001 Aerodynamic and aeroelastic characteristics of the DARPA Smart Wing Phase II wind tunnel model
Brian P. Sanders, Christopher A. Martin, David L. Cowan
Author Affiliations +
Abstract
A wind tunnel demonstration was conducted on a scale model of an unmanned combat air vehicle (UCAV). The model was configured with traditional hinged control surfaces and control surfaces manufactured with embedded shape memory alloys. Control surfaces constructed with SMA wires enable a smooth and continuous deformation in both the spanwise and cordwise directions. This continuous shape results in some unique aerodynamic effects. Additionally, the stiffness distribution of the model was selected to understand the aeroelastic behavior of a wing designed with these control surfaces. The wind tunnel experiments showed that the aerodynamic performance of a wing constructed with these control surfaces is significantly improved. However, care must be taken when aeroelastic effects are considered since the wing will show a more rapid reduction in the roll moment due to increased moment arm about the elastic axis. It is shown, experimentally, that this adverse effect is easily counteracted using leading edge control surfaces.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Brian P. Sanders, Christopher A. Martin, and David L. Cowan "Aerodynamic and aeroelastic characteristics of the DARPA Smart Wing Phase II wind tunnel model", Proc. SPIE 4332, Smart Structures and Materials 2001: Industrial and Commercial Applications of Smart Structures Technologies, (14 June 2001); https://doi.org/10.1117/12.429679
Lens.org Logo
CITATIONS
Cited by 12 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Aerodynamics

Shape memory alloys

Unmanned combat air vehicles

Control systems

3D modeling

Actuators

Manufacturing

Back to Top