Paper
5 January 1984 Structural Mechanics Of A Mortar Launched IR Dome
Joel Speare, Anthony Belloli
Author Affiliations +
Proceedings Volume 0450, Structural Mechanics of Optical Systems I; (1984) https://doi.org/10.1117/12.939283
Event: 1983 Cambridge Symposium, 1983, Cambridge, United States
Abstract
This paper presents a case study of the development of a Zinc Sulfide IR dome for a mortar-launched projectile. As a case study, it demonstrates the value of analysis as a means to obtain insight and derive solutions to design problems. It also describes problems solved by a variety of finite element codes: SAAS-3, EPIC-2, and NASTRAN. The paper discusses the determination of inertia loads, joint design, bonding of the dome to the attachment ring, verification testing, mortar test firings, and post test analyses. The paper discusses various FEM analyses performed during the development. Inertia load factors used for design were derived from a transient dynamic response analysis of launch and muzzle exit. Structural integrity of the brittle ceramic dome material was demonstrated by a detailed FEM stress analysis of the joint. This analysis considered modeling techniques for threaded and bonded joints. This FE model was also utilized to define an equivalent proof pressure test to simulate the inertia load. Initial tests resulted in the failure of both the dome and the attachment device of internal ballast. Additional analyses were conducted to evaluate modal response and impact. These analyses established the internal ballast as the cause of failure, and subsequent successful dome test firings validated the analyses.
© (1984) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joel Speare and Anthony Belloli "Structural Mechanics Of A Mortar Launched IR Dome", Proc. SPIE 0450, Structural Mechanics of Optical Systems I, (5 January 1984); https://doi.org/10.1117/12.939283
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Failure analysis

Zinc

Domes

Mechanics

Epoxies

Finite element methods

Stress analysis

RELATED CONTENT

Quantitative thermoelastic stress analysis
Proceedings of SPIE (December 03 1993)
Nonathermal potting of optics
Proceedings of SPIE (September 28 1999)
Improved design of piezoelectric microactuators for HDD
Proceedings of SPIE (November 14 2002)

Back to Top