Paper
28 January 2002 General split window algorithm for land surface temperature estimation
C. O. Mito, Giovanni Laneve, Marco M. Castronuovo
Author Affiliations +
Proceedings Volume 4542, Remote Sensing for Agriculture, Ecosystems, and Hydrology III; (2002) https://doi.org/10.1117/12.454192
Event: International Symposium on Remote Sensing, 2001, Toulouse, France
Abstract
A general multichannel algorithm for land surface temperature estimation is described. It has been set up by simulations of NOAA / AVHRR-2 measurements in order to parameterize the temperature correction due to atmospheric water vapor absorption and deviation of surface emissivity from unity at 11 and 12 micrometers wavelengths. The parameterization is based on model calculations performed with FASCODE, a line - by - line radiative transfer program. A comparison with one particular algorithm1 selected by ESA to produce global thermal maps of the Earth2 shows no significant difference in the retrieved surface temperature for water vapor around 2.5 g/cm2. For greater deviations from this value of water vapor content the difference in the results can be remarkably large. Model calculations have been performed for deviations of each parameter (water vapor and surface emissivity) individually and for both parameters simultaneously. The approach used allows the application of the algorithm to other sensors. In fact, the next step of our activity on this subject envisages its application to the appropriate bands of the MODIS sensor.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. O. Mito, Giovanni Laneve, and Marco M. Castronuovo "General split window algorithm for land surface temperature estimation", Proc. SPIE 4542, Remote Sensing for Agriculture, Ecosystems, and Hydrology III, (28 January 2002); https://doi.org/10.1117/12.454192
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Atmospheric modeling

Atmospheric corrections

Absorption

MODIS

Sensors

Temperature metrology

Algorithm development

Back to Top