Paper
11 March 2002 Extended chamber matching and repeatability study for chrome etch
Yi-Chiau Huang, Melisa J. Buie, Brigitte C. Stoehr, Alex H. Buxbaum, Guenther G. Ruhl
Author Affiliations +
Abstract
Shrinking design rules, optical proximity correction and advanced phase shifting techniques require new methods of photomask manufacturing. The Applied Materials Centura photomask etch chamber leverages Applied Materials' extensive etch experience to provide an innovative dry etch solution to the mask dry etch challenges for < 0.13 micrometers device generations. Repeatable, consistent, stable etch performance is critical for advanced mask manufacturing. An extended chamber matching and repeatability study for chrome etch found that stable chrome and photoresist etch rates (and therefore selectivities) are produced on the Applied Materials Centura photomask etch chamber. The etch responses are consistent mask to mask as well as chamber to chamber. Prior to the extended study, pumping efficiencies, RF source and bias calibrations and optical emission spectral responses were compared. Since the study was performed at several different sites, the metrology tools were calibrated using masks specifically designed for this purpose. The marathon testing illustrates the stable etch performance over time.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yi-Chiau Huang, Melisa J. Buie, Brigitte C. Stoehr, Alex H. Buxbaum, and Guenther G. Ruhl "Extended chamber matching and repeatability study for chrome etch", Proc. SPIE 4562, 21st Annual BACUS Symposium on Photomask Technology, (11 March 2002); https://doi.org/10.1117/12.458344
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 3 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Photoresist materials

Photomasks

Chlorine

Chromium

Plasma

Calibration

RELATED CONTENT

Dry etching technologies for Cr film
Proceedings of SPIE (June 12 2018)
Plasma etch of Cr masks utilizing TCP source for a...
Proceedings of SPIE (August 16 2002)
Dry etching of Cr layer and its loading effect
Proceedings of SPIE (September 05 2001)
Dry etching technology of Cr and MoSi layers using high...
Proceedings of SPIE (January 22 2001)
A study of Cr to Mosi in situ dry etching...
Proceedings of SPIE (November 04 2005)

Back to Top