Main design issues for embedding onto a wireless miniature robot a scanning tunneling positioning system capable of atomic resolution over a half-meter diameter surface area

Sylvain M. Martel; Torsten Koker; Ian Warwick Hunter

doi:10.1117/12.444146

8 October 2001 Main design issues for embedding onto a wireless miniature robot a scanning tunneling positioning system capable of atomic resolution over a half-meter-diameter surface area

Sylvain M. Martel, Torsten Koker, Ian Warwick Hunter

Author Affiliations +

Proceedings Volume 4568, Microrobotics and Microassembly III; (2001) https://doi.org/10.1117/12.444146
Event: Intelligent Systems and Advanced Manufacturing, 2001, Boston, MA, United States

Abstract

Implementing instruments in the form of wireless miniature robots designed to operate at the atomic scale requires a positioning system capable of atomic resolution over a relatively large surface area. Interferometers or similar instruments are not adequate for such an environment because of the high probability that another robot obstructs the path of the laser during position measurement. As such, we have developed an infrared system based on a position sensing detection technique mounted on an x-y stepping stage where the position of an infrared signal transmitted upward from a miniature wireless robot can be detected with a resolution of +/- 1.585 micrometers over a 0.5 meter diameter circular surface. Although a fleet of miniature robots distributed over a relatively large area can be supported simultaneously, the system is still far from reaching positioning accuracy down to the level of a single atom. This is why we are embedding the capability to detect surface features down to the size of a single atom using scanning tunneling microscopy (STM) techniques onto the miniature robots. The dynamic range of the scanning piezo-tube is one of many design issues that must be carefully planned. For instance, the scanning system must be capable of detecting each atom in the scan path in order to determine the distance by counting the number of atoms while the maximum scan range must reach the discrimination level of the infrared positioning system despite many artifacts such as non-linearity errors and hysteresis. The feasibility and the design of such system are described.

Citation Download Citation

Sylvain M. Martel, Torsten Koker, and Ian Warwick Hunter "Main design issues for embedding onto a wireless miniature robot a scanning tunneling positioning system capable of atomic resolution over a half-meter-diameter surface area", Proc. SPIE 4568, Microrobotics and Microassembly III, (8 October 2001); https://doi.org/10.1117/12.444146

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available