Paper
11 April 2002 Virtual ultrasound sources in high-resolution ultrasound imaging
Author Affiliations +
Abstract
This paper investigates the concept of virtual source elements. It suggests a common framework for increasing the resolution, and penetration depth of several imaging modalities by applying synthetic aperture focusing (SAF). SAF is used either as a post focusing procedure on the beamformed data, or directly on the raw signals from the transducer elements. Both approaches increase the resolution. The paper shows that in one imaging situation, there can co-exist different virtual sources for the same scan line - one in the azimuth plane, and another in the elevation. This property is used in a two stage beamforming procedure for 3D ultrasound imaging. The position of the virtual source, and the created waveform are investigated with simulation, and with pulse-echo measurements. There is good agreement between the estimated wavefront and the theoretically fitted one. Several examples of the use of virtual source elements are considered. Using SAF on data acquired for a conventional linear array imaging improves the penetration depth for the particular imaging situation from 80 to 110 mm. The independent use of virtual source elements in the elevation plane decreases the respective size of the point spread function at 100 mm below the transducer from 7mm to 2 mm.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Svetoslav Nikolov and Joergen Arendt Jensen "Virtual ultrasound sources in high-resolution ultrasound imaging", Proc. SPIE 4687, Medical Imaging 2002: Ultrasonic Imaging and Signal Processing, (11 April 2002); https://doi.org/10.1117/12.462178
Lens.org Logo
CITATIONS
Cited by 54 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transducers

Wavefronts

Point spread functions

Ultrasonography

Image resolution

Imaging arrays

Signal to noise ratio

Back to Top