Paper
18 December 2002 A Prototype 1×32 Ge:Ga/Ge:Sb detector array with SBRC-190 CTIA readout multiplexer
Jam Farhoomand, David Sisson, Dzung T. Hoang, Jeffrey W. Beeman
Author Affiliations +
Abstract
We have constructed a far infrared detector array consisting of a 1×16 Ge:Ga and a 1×16 Ge:Sb placed side-by-side to form a linear, 1×32 array. An SBRC-190 readout multiplexer, which is a 1×32, multi-gain, capacitive transimpedance amplifier (CTIA) manufactured by Raytheon Infrared Operation, is wire bonded to the array. The array has been tested in the temperature range of 3.2K to 2.6K under various infrared radiation levels. In this presentation we will discuss the design and will report on the results of the preliminary tests conducted on this array at 3.0K. This developmental effort is intended to test the viability of the SBRC-190 unit-cell design for far infrared detector arrays and help foster improvement and further development of readout electronics based on the CTIA design. In addition, we hope to extend the detector design and develop a two-dimensional, monolithic array.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jam Farhoomand, David Sisson, Dzung T. Hoang, and Jeffrey W. Beeman "A Prototype 1×32 Ge:Ga/Ge:Sb detector array with SBRC-190 CTIA readout multiplexer", Proc. SPIE 4818, Infrared Spaceborne Remote Sensing X, (18 December 2002); https://doi.org/10.1117/12.458073
Lens.org Logo
CITATIONS
Cited by 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Multiplexers

Sensors

Capacitors

Detector arrays

Field effect transistors

Semiconducting wafers

Infrared radiation

RELATED CONTENT


Back to Top