Paper
3 March 2003 Nd:YAG laser welding of aluminum alloy assisted by high-peak pulsed lasers
Toshihiko Ooie, Akihiro Utsumi, Tetsuo Yano
Author Affiliations +
Proceedings Volume 4831, First International Symposium on High-Power Laser Macroprocessing; (2003) https://doi.org/10.1117/12.497779
Event: LAMP 2002: International Congress on Laser Advanced Materials Processing, 2002, Osaka, Japan
Abstract
Nd:YAG laser welding of an aluminum alloy assisted by high-peak pulsed lasers such as excimer and Q-switched Nd:YAG laseers was investigated. In this novel laser hybrid welding, a plasma induced by a high-peak power laser absorbs the Nd:YAG laser energy and transmits it to a work piece. In the laser welding of the aluminum alloy using the Nd:YAG laser of which maximu power was 6 kW, the heat input and the penetration depth increased by 20% and 8%, respectively, by using simultaneous irradiation of the excimer laser of which average power was only 16 W. According to the optical emission of the plasmas, not only KrF excimer laser but also 2nd harmonic of a Q-switched Nd:YAG laser is applicable for the laser hybrid welding as the high-peak pulsed laser.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Toshihiko Ooie, Akihiro Utsumi, and Tetsuo Yano "Nd:YAG laser welding of aluminum alloy assisted by high-peak pulsed lasers", Proc. SPIE 4831, First International Symposium on High-Power Laser Macroprocessing, (3 March 2003); https://doi.org/10.1117/12.497779
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Excimer lasers

Nd:YAG lasers

Laser welding

Q switched lasers

Plasma

Aluminum

Pulsed laser operation

RELATED CONTENT

Q switched Nd YAG V YAG microchip 1338 nm laser...
Proceedings of SPIE (December 01 2017)
High-power COIL and YAG laser welding
Proceedings of SPIE (May 06 2002)
Studies on the interaction between the YAG laser and the...
Proceedings of SPIE (September 01 1995)
Excimer laser processing of aerospace alloys
Proceedings of SPIE (April 19 1993)
Diagnosis of plasma in CCD damage process induced by laser
Proceedings of SPIE (December 02 1993)

Back to Top