Paper
30 May 2003 Characterization of capabilities of Z-scan technique for measuring divergence and astigmatism of laser beams (Abstract Only)
Author Affiliations +
Abstract
We present the results of comprehensive characterization of capabilities of Crystal Scan device for measuring laser beams. (1) As small as 0.7 mm waist radius was measured for a laser beam of λ = 409 nm wavelength. The measurement lasts about 1 s with actual scan time being about 300 ms. (2) The focal waist position with accuracy better than 1% using focusing lenses of 6 mm to 50 mm focal length was determined. (3) Laser beam divergence in the range of 10-5rad to 10-2rad was measured and compared both to theoretically anticipated values as well as to the results obtained by conventional techniques. (4) We have identified the specific features of the signal received from astigmatic beams and measured the position and waist radii of both focuses. (5) The technique was successfully applied to measuring of laser beams at 1064 nm, 1341 nm and 10.6 mm wavelengths.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sarik R. Nersisyan, Manuel J. Mora, and Nelson V. Tabiryan "Characterization of capabilities of Z-scan technique for measuring divergence and astigmatism of laser beams (Abstract Only)", Proc. SPIE 4932, Laser-Induced Damage in Optical Materials: 2002 and 7th International Workshop on Laser Beam and Optics Characterization, (30 May 2003); https://doi.org/10.1117/12.472038
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Monochromatic aberrations

Crystals

Laser crystals

Laser optics

Lenses

Measurement devices

Electro optics

Back to Top