Initial investigation in actuator design using high-temperature shape memory alloy

Muhammad A. Qidwai; Abhijit Bhattacharyya; Ivan Vahhi; Sergei Pulnev

doi:10.1117/12.484699

13 August 2003 Initial investigation in actuator design using high-temperature shape memory alloy

Muhammad A. Qidwai, Abhijit Bhattacharyya, Ivan Vahhi, Sergei Pulnev

Author Affiliations +

Proceedings Volume 5053, Smart Structures and Materials 2003: Active Materials: Behavior and Mechanics; (2003) https://doi.org/10.1117/12.484699
Event: Smart Structures and Materials, 2003, San Diego, California, United States

Abstract

The need for shape memory alloys (SMA) with high transformation temperatures is urgent. SMA actuators may then be designed that will demonstrate two important attributes: (i) actuation in a high temperature environment and (ii) high actuation frequency in a moderate temperature environment. Copper-Aluminum-Nickel (CuAlNi) single crystal alloy is a promising candidate due to favorable characteristics such as wide range of transformation temperatures, large actuation stress and strain, and lack of plastic deformation under cyclic loading. These characteristics point to the possibility that CuAlNi single crystal high temperature SMA (HTSMA) actuators can be developed that will demonstrate the attributes mentioned above. An initial investigation of these possibilities is carried out computationally by analyzing a HTSMA-actuated airfoil. An existing rate-independent thermomechanical model is calibrated to describe the CuAlNi material behavior. Time-dependent thermomechanically-coupled parametric studies are carried out to yield information about the airfoil stroke (trailing edge deflection), the actuation energy required and the actuation frequency possible for cyclic actuation, all as a function of transformation temperatures. For comparison purposes, a similar parametric study is also carried out for NiTi polycrystalline SMA. The analysis indicates that a CuAlNi HTSMA actuated airfoil will demonstrate a cooling time two to six times lower than its NiTi SMA counterpart.

Citation Download Citation

Muhammad A. Qidwai, Abhijit Bhattacharyya, Ivan Vahhi, and Sergei Pulnev "Initial investigation in actuator design using high-temperature shape memory alloy", Proc. SPIE 5053, Smart Structures and Materials 2003: Active Materials: Behavior and Mechanics, (13 August 2003); https://doi.org/10.1117/12.484699

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE