Paper
12 January 2004 Design of a small laser ceilometer and visibility measuring device for helicopter landing sites
Author Affiliations +
Abstract
Hardware development for remote sensing costs a lot of time and money. A virtual instrument based on software modules was developed to optimise a small visibility and cloud base height sensor. Visibility is the parameter describing the turbidity of the atmosphere. This can be done either by a mean value over a path measured by a transmissometer or for each point of the atmosphere like the backscattered intensity of a range resolved lidar measurement. A standard ceilometer detects the altitude of clouds by using the runtime of the laser pulse and the increasing intensity of the back scattered light when hitting the boundary of a cloud. This corresponds to hard target range finding, but with a more sensitive detection. The output of a standard ceilometer is in case of cloud coverage the altitude of one or more layers. Commercial cloud sensors are specified to track cloud altitude at rather large distances (100 m up to 10 km) and are therefore big and expensive. A virtual instrument was used to calculate the system parameters for a small system for heliports at hospitals and landing platforms under visual flight rules (VFR). Helicopter pilots need information about cloud altitude (base not below 500 feet) and/or the visibility conditions (visual range not lower than 600m) at the destinated landing point. Private pilots need this information too when approaching a non-commercial airport. Both values can be measured automatically with the developed small and compact prototype, at the size of a shoebox for a reasonable price.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jurgen Streicher, Christian Werner, and Walter Dittel "Design of a small laser ceilometer and visibility measuring device for helicopter landing sites", Proc. SPIE 5240, Laser Radar Technology for Remote Sensing, (12 January 2004); https://doi.org/10.1117/12.510478
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Clouds

Visibility

LIDAR

Sensors

Fiber optic gyroscopes

Visibility through fog

Atmospheric particles

RELATED CONTENT

Effects of fog attenuation on lidar data in urban environment
Proceedings of SPIE (February 22 2018)
Eye-safe laser radar for the detection of fog banks
Proceedings of SPIE (September 15 1995)
Performance Of A Coherent Lidar Remote Sensor In Snow And...
Proceedings of SPIE (September 22 1983)
Ground based remote sensing of wind vector and visibility ...
Proceedings of SPIE (September 16 1999)
Ground based remote sensing of wind vector and visibility ...
Proceedings of SPIE (December 12 2001)
Verification of lidar visibility
Proceedings of SPIE (September 20 1995)

Back to Top