Reliability issues of an accelerometer under environmental stresses

Petra Schmitt; Francis Pressecq; Guy Perez; Xavier Lafontan; Jean Marc Nicot; Daniel Esteve; Jean Yves Fourniols; Henri Camon; Coumar Oudea

doi:10.1117/12.524575

23 December 2003 Reliability issues of an accelerometer under environmental stresses

Petra Schmitt, Francis Pressecq, Guy Perez, Xavier Lafontan, Jean Marc Nicot, Daniel Esteve, Jean Yves Fourniols, Henri Camon, Coumar Oudea

Author Affiliations +

Proceedings Volume 5343, Reliability, Testing, and Characterization of MEMS/MOEMS III; (2003) https://doi.org/10.1117/12.524575
Event: Micromachining and Microfabrication, 2004, San Jose, California, United States

Abstract

COTS (Commercial-off-the-shelf) MEMS components are very interesting for space applications because they are lightweight, small, economic in energy, cheap and available in short delays. The reliability of MEMS COTS that are used out of their intended domain of operation (such as a space application) might be assured by a reliability methodology derived from the Physics of Failure approach. In order to use this approach it is necessary to create models of MEMS components that take into consideration environmental stresses and thus can be used for lifetime prediction. Unfortunately, today MEMS failure mechanisms are not well understood today and therefore a preliminary work is necessary to determine influent factors and physical phenomena. The model development is based on a good knowledge of the process parameters (Young’s modulus, stress...), environmental tests and appropriated modeling approaches, such a finite element analysis (FEA) and behavioural modeling. In order to do the environmental tests and to analyse MEMS behaviour, we have developed the Environmental MEMS Analyzer EMA 3D. The described methodology has been applied to a Commercial-off-the-shelf (COTS) accelerometer, the ADXL150. A first level behavioral model was created and then refined in the following steps by the enrichment with experimental results and finite element simulations.

Citation Download Citation

Petra Schmitt, Francis Pressecq, Guy Perez, Xavier Lafontan, Jean Marc Nicot, Daniel Esteve, Jean Yves Fourniols, Henri Camon, and Coumar Oudea "Reliability issues of an accelerometer under environmental stresses", Proc. SPIE 5343, Reliability, Testing, and Characterization of MEMS/MOEMS III, (23 December 2003); https://doi.org/10.1117/12.524575

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE