Airborne contamination control for 157-nm lithography: influence of ammonia contamination

Hidefumi Matsui; Junichi Kitano; Kosuke Yoshihara; Etsurou Kawaguchi; Takamitsu Furukawa; Kentaro Matsunaga; Toshiro Itani; Kiyoshi Fujii

doi:10.1117/12.534975

14 May 2004 Airborne contamination control for 157-nm lithography: influence of ammonia contamination

Hidefumi Matsui, Junichi Kitano, Kosuke Yoshihara, Etsurou Kawaguchi, Takamitsu Furukawa, Kentaro Matsunaga, Toshiro Itani, Kiyoshi Fujii

Author Affiliations +

Proceedings Volume 5376, Advances in Resist Technology and Processing XXI; (2004) https://doi.org/10.1117/12.534975
Event: Microlithography 2004, 2004, Santa Clara, California, United States

Abstract

The ammonia durability of the 157-nm lithography resists is still unclear due to the smaller target dimensions, thinner resist films, and variations in base polymer compared to those of 193-nm and 248-nm resists. It has not been determined what ammonia concentrations must be achieved in order to successfully process 157-nm resists. Until now, the ammonia durability of initial 157-nm resists during post exposure delay (PED) and during post coating delay (PCD) was compared to those of 193-nm and 248-nm resists. It was confirmed that all initial 157-nm resists had low ammonia durability. In this paper, the ammonia durability of newly developed 157-nm resists, that have improved transmittance and resolution, was evaluated during PED and PCD. Then, we found that the ammonia durability of these resists were not enough and that the ammonia concentration from exposure to development should be kept under 0.1 ppb. Thermal desorption spectroscopy results showed that resists with lower ammonia durability tended to have more amount of adsorbed ammonia than other resists. Furthermore, the ammonia durability of 157-nm resist couldn’t be improved to the level of that of 193- and 248-nm resist by the adjustment amount of resist additives. Due to the low ammonia durability, it will be necessary to control the ammonia concentration below 0.1 ppb in processing equipment used in 157-nm lithography.

Citation Download Citation

Hidefumi Matsui, Junichi Kitano, Kosuke Yoshihara, Etsurou Kawaguchi, Takamitsu Furukawa, Kentaro Matsunaga, Toshiro Itani, and Kiyoshi Fujii "Airborne contamination control for 157-nm lithography: influence of ammonia contamination", Proc. SPIE 5376, Advances in Resist Technology and Processing XXI, (14 May 2004); https://doi.org/10.1117/12.534975

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Contamination

Lithography

Coating

Polymers

Adsorption

Transmittance

Contamination control

Show All Keywords

Keywords/Phrases

Search In:

Publication Years