Development of a design curve for particle impact dampers

Michael Y. Yang; George A. Lesieutre; Stephen A. Hambric; Gary H. Koopmann

doi:10.1117/12.540019

29 July 2004 Development of a design curve for particle impact dampers

Michael Y. Yang, George A. Lesieutre, Stephen A. Hambric, Gary H. Koopmann

Author Affiliations +

Proceedings Volume 5386, Smart Structures and Materials 2004: Damping and Isolation; (2004) https://doi.org/10.1117/12.540019
Event: Smart Structures and Materials, 2004, San Diego, CA, United States

Abstract

Particle impact dampers (PIDs) are enclosures partially filled with particles of various sizes and materials. When attached to a vibrating structure, they dissipate energy through inelastic collisions between the particle bed and the enclosure wall, as well as between particles. In this work, the development of a design curve that can be used to predict the damping characteristics of particle impact dampers is presented. A power measurement technique enabled the time-efficient measurement of the damping properties of the PID. This technique enjoys several advantages over traditional loss factor measurements, including the flexibility to analyze the behavior of the PID at any frequency or excitation amplitude, and the ability to estimate the damping contribution for any structure operating such that the PID experiences similar conditions. Using this power measurement technique, a large number of experiments were conducted to determine the effects of vibration amplitude, excitation frequency, gap size, particle size, and particle mass on the dissipated power and effective mass of the PID. The power data were then systematically collapsed into a pair of two-dimensional master design curves with unitless axes which are comprised of combinations of design parameters. A “damping efficiency” of the PID may be predicted from the design curves for specific applications. A physical interpretation of the design curves is given, and the performance of a PID on a structure is used to verify their predictive capabilities.

Citation Download Citation

Michael Y. Yang, George A. Lesieutre, Stephen A. Hambric, and Gary H. Koopmann "Development of a design curve for particle impact dampers", Proc. SPIE 5386, Smart Structures and Materials 2004: Damping and Isolation, (29 July 2004); https://doi.org/10.1117/12.540019

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE