Paper
14 February 2005 Hybrid-integrated optical acceleration seismometer and its digital processing system
Author Affiliations +
Abstract
Hybrid-integrated Optical acceleration seismometer and its digital signal processing system are researched and developed. The simple system figure of the seismometer is given. The principle of the seismometer is explicated. The seismometer is composed of a seismic mass,Integrated Optical Chips and a set of Michelson interferometer light path. The Michelson Integrated Optical Chips are critical parts among the sensor elements. The simple figure of the digital signal processing system is given. As an advanced quality digital signal processing (DSP) chip equipped with necessary circuits has been used in its digital signal processing system, a high accurate detection of the acceleration signal has been achieved and the environmental interference signal has been effectively compensated. Test results indicate that the accelerometer has better frequency response well above the resonant frequency, and the output signal is in correspondence with the input signal. The accelerometer also has better frequency response under the resonant frequency. At last, the curve of Seismometer frequency response is given.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
De En, Caihe Chen, Yuming Cui, Donglin Tang, Zhengxi Liang, and Hongyu Gao "Hybrid-integrated optical acceleration seismometer and its digital processing system", Proc. SPIE 5634, Advanced Sensor Systems and Applications II, (14 February 2005); https://doi.org/10.1117/12.576277
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Digital signal processing

Hybrid optics

Signal processing

Sensors

Demodulation

Integrated optics

Phase shifts

Back to Top