Paper
22 January 2005 Actively controlled diffraction grating interferometer MEMS devices
Author Affiliations +
Abstract
A micrograting interferometer has been fabricated to use in measuring the static and dynamic performance of MEMS devices. These measurements aid in qualifying the functionality of fabricated MEMS devices, as well as improving fabrication techniques. The metrology system uses a phase sensitive diffraction grating for interferometric axial resolution and a microfabricated lens for improved lateral resolution. In addition, active control is applied to the system to reduce the impact of mechanical vibrations and insure a high degree of measurement sensitivity. The control scheme is demonstrated successfully in the scanning of MEMS devices in the experiment. A deformable grating, which controls measurement sensitivity, has been fabricated and integrated with optoelectronics in small volume. Experiments with the integrated package demonstrate that the measurement sensitivity can be adjusted by actuating the deformable grating. This integrated single device illustrates that the deformable grating sensor can be expanded to form arrays for parallel measurement of MEMS device.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Byungki Kim, Michael C. Schmittdiel, F. Levent Degertekin, and Thomas R. Kurfess "Actively controlled diffraction grating interferometer MEMS devices", Proc. SPIE 5721, MOEMS Display and Imaging Systems III, (22 January 2005); https://doi.org/10.1117/12.592215
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Microelectromechanical systems

Diffraction gratings

Control systems

Interferometers

Sensors

Actuators

Metrology

Back to Top