Paper
21 March 2006 Printability of quartz defects in a production Cr-less mask process
Gregory Hughes, Susan MacDonald, John Riddick, Anthony Nhiev, Jason Hickethier
Author Affiliations +
Abstract
Chromeless PSM photomasks have been successfully applied to a production memory application. This 248-nm application has allowed an extremely aggressive, dense design to be successfully deployed without changing wavelength. This was achieved with an advanced resolution enhancement technique, a chromeless phase-shifting mask, to provide a more cost-effective total lithographic solution. The key to this technology is a mask that delivers high wafer-die yields, while delivering resolution at low k1. Therefore, the mask must have zero printing defects. In order to understand printing defects, many types of potential defects were analyzed and correlated back to the mask locations using both a 248-nm AIMs tool and SEM images. These defects were also correlated to a 257-nm KLA 576 tool using die-to-die inspection runs. This paper will examine chromeless mask phase-defect printing effects by using inspection capture at the key manufacturing steps (post-Cr etch, post-Qz Etch, and post-Cr removal). These defects will then be tracked through processes using SEM, AIMs, RAVE repair, and post-repair AIMs.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gregory Hughes, Susan MacDonald, John Riddick, Anthony Nhiev, and Jason Hickethier "Printability of quartz defects in a production Cr-less mask process", Proc. SPIE 6154, Optical Microlithography XIX, 615446 (21 March 2006); https://doi.org/10.1117/12.656525
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Quartz

Inspection

Etching

Printing

Scanning electron microscopy

Lithography

Back to Top