Fiber Bragg grating sensors for use in pavement structural strain-temperature monitoring

Jian-Neng Wang; Jaw-Luen Tang; Hsiang-Ping Chang

doi:10.1117/12.658938

11 April 2006 Fiber Bragg grating sensors for use in pavement structural strain-temperature monitoring

Jian-Neng Wang, Jaw-Luen Tang, Hsiang-Ping Chang

Proceedings Volume 6174, Smart Structures and Materials 2006: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems; 61743S (2006) https://doi.org/10.1117/12.658938
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2006, San Diego, California, United States

Abstract

In this paper, we describe the development and realization of a newly high-resolution temperature and strain sensor with fiber Bragg grating (FBG) technology. The FBG sensor consists of a reference fiber grating and a grating pair scheme that could offer the potential of simultaneous measurement of strain and temperature for monitoring pavement structures. Experimental results showed that measurement errors of 6 με and 0.13^oC for strain and temperature could be achieved, respectively. The reliability and long-term stability for temperature measurement with this type of sensor were examined by mounting sensors on the surface of asphalt and concrete specimens. Small root mean square temperature variations (better than 1^oC) and excellent long-term stability (within 2%) were obtained. The maximum variations in temperature for 48 hours were only 1.94% and 2.32% for asphalt and concrete specimens, respectively. The feasibility of strain measurement for pavement structures was conducted by mounting the packaged sensor on the surface of an asphalt specimen under the indirect tensile loading condition. The measured strains from the packaged FBG sensor agreed linearly with applied loads. A finite-element model (FEM) was conducted to verify the strains obtained from the sensors. In comparison with experimental data and numerical results, the numerical values were all located within FBG measurement error ranges. The strain differences between measurements from the FBG sensor and FEM predictions were between 5% and 7%. This type of simple and low-cost FBG sensor is expected to benefit the developments and applications of pavement structures or transportation infrastructure.

Citation Download Citation

Jian-Neng Wang, Jaw-Luen Tang, and Hsiang-Ping Chang "Fiber Bragg grating sensors for use in pavement structural strain-temperature monitoring", Proc. SPIE 6174, Smart Structures and Materials 2006: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, 61743S (11 April 2006); https://doi.org/10.1117/12.658938

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available