Paper
14 August 2006 Absolute length calibration of gauge blocks using optical comb of a femtosecond pulse laser
Jonghan Jin, Young-Jin Kim, Yunseok Kim, Chu-Shik Kang, Seung-Woo Kim
Author Affiliations +
Abstract
We report an exploitation of the optical comb of a femtosecond pulse laser as the wavelength ruler for the task of absolute length calibration of gauge blocks. To that end, the optical comb was stabilized to an Rb atomic clock and an optical frequency synthesizer was constructed by tuning an external single-frequency laser to the optical comb. The absolute height of gauge blocks was measured by means of multi-wavelength interferometry using multiple beams of different wavelengths consecutively provided by the optical frequency synthesizer. The wavelength uncertainty was measured 1.9 × 10-10 that leads to an overall calibration uncertainty of 17 nm (k=1) in determining the absolute length of gauge blocks of 25 mm nominal length.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jonghan Jin, Young-Jin Kim, Yunseok Kim, Chu-Shik Kang, and Seung-Woo Kim "Absolute length calibration of gauge blocks using optical comb of a femtosecond pulse laser", Proc. SPIE 6292, Interferometry XIII: Techniques and Analysis, 62920O (14 August 2006); https://doi.org/10.1117/12.678448
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Calibration

Femtosecond phenomena

Interferometers

Interferometry

Rubidium

Pulsed laser operation

Laser stabilization

Back to Top