Paper
3 November 2006 Geiger-mode InGaAsP/InP APDs optimized for single photon counting at 1.06 μm
Keith Forsyth, Noah Clay
Author Affiliations +
Proceedings Volume 6372, Advanced Photon Counting Techniques; 63720L (2006) https://doi.org/10.1117/12.685234
Event: Optics East 2006, 2006, Boston, Massachusetts, United States
Abstract
Avalanche photodiodes optimized for Geiger-mode single photon counting at 1.06 microns have been fabricated using a quaternary InGaAsP absorber to reduce the dark count rate without sacrificing high photon detection probability. The dark count rate at a given detection probability is more than an order of magnitude lower than that of comparable Geiger-mode APDs fabricated with ternary InGaAs absorbers. Some devices show anomalous afterpulsing behavior that is reduced in severity at lower temperatures, the inverse of typical behavior. This unusual afterpulsing behavior allows for lower temperature operation without sacrificing maximum count rate, and may also offer new clues to the physical origin of afterpulsing in general.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Keith Forsyth and Noah Clay "Geiger-mode InGaAsP/InP APDs optimized for single photon counting at 1.06 μm", Proc. SPIE 6372, Advanced Photon Counting Techniques, 63720L (3 November 2006); https://doi.org/10.1117/12.685234
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Avalanche photodetectors

Single photon

Semiconducting wafers

Silicon

Absorption

Photodetectors

Diffusion

Back to Top