Paper
20 December 2006 Adhesive wafer-to-wafer bonding using contact imprinting
Liming Yu, Ah Ju Pang, Bangtao Chen, Francis E. H. Tay, Ciprian Iliescu
Author Affiliations +
Proceedings Volume 6415, Micro- and Nanotechnology: Materials, Processes, Packaging, and Systems III; 64151I (2006) https://doi.org/10.1117/12.696544
Event: SPIE Smart Materials, Nano- and Micro-Smart Systems, 2006, Adelaide, Australia
Abstract
The present work proposes an adhesive bonding technique, at wafer level, using SU-8 negative photoresist as intermediate layer. The adhesive was selective imprint on one of the bonding surface. The main applications are in microfluidic area where a low temperature bonding is required. The method consists of three major steps. First the adhesive layer is deposited on one of the bonding surface by contact imprinting from a dummy wafer where the SU-8 photoresist was initially spun, or from a Teflon cylinder. Second, the wafers to be bonded are placed in contact and aligned. In the last step, the bonding process is performed at temperatures between 100°C and 200°C, a pressure of 1000 N in vacuum on a classical wafer bonding system. The results indicate a low stress value induced by the bonding technique. In the same time the process presents a high yield: 95-100%. The technique was successfully tested in the fabrication process of a dielectrophoretic device.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Liming Yu, Ah Ju Pang, Bangtao Chen, Francis E. H. Tay, and Ciprian Iliescu "Adhesive wafer-to-wafer bonding using contact imprinting", Proc. SPIE 6415, Micro- and Nanotechnology: Materials, Processes, Packaging, and Systems III, 64151I (20 December 2006); https://doi.org/10.1117/12.696544
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconducting wafers

Adhesives

Wafer bonding

Photoresist materials

Silicon

Microfluidics

Glasses

Back to Top