Innovative materials tailored for advanced microoptic applications

Roland Himmelhuber; Marion Fink; Karl Pfeiffer; Ute Ostrzinski; Anna Klukowska; Gabi Gruetzner; Ruth Houbertz; Herbert Wolter

doi:10.1117/12.715056

9 February 2007 Innovative materials tailored for advanced micro-optic applications

Roland Himmelhuber, Marion Fink, Karl Pfeiffer, Ute Ostrzinski, Anna Klukowska, Gabi Gruetzner, Ruth Houbertz, Herbert Wolter

Author Affiliations +

Proceedings Volume 6478, Photonics Packaging, Integration, and Interconnects VII; 64780E (2007) https://doi.org/10.1117/12.715056
Event: Integrated Optoelectronic Devices 2007, 2007, San Jose, California, United States

Abstract

The handling of a continuously increasing amount of data leads to a strong need for high-speed short-range connections. Conventional Cu technology between chips on a board is limited. Optical interconnects will dominate the market, since they can overcome the limitations. One of the issues for materials used, e.g., for waveguides embedded in printed circuit boards (PCBs) is the compatibility with standard epoxies used for PCBs during the entire board fabrication process. Materials applied for optical interconnects should be mechanically and optically reliable, and also allow low-cost production. From the material production side, the process should be easy to up-scale. Therefore, anticipatory research strategy and suitable tailoring is asked for. The handling of light in the UV and visible range often requires the use of specially designed materials. Most polymer materials show an increased yellowing effect upon being exposed to shorter wavelength light. The major influence on the absorption in the UV and visible range of a UV curable material is related to the UV initiator, beside any other chromophores formed mainly during the exposure. Different material approaches will be presented which fulfil the requirements for highly sophisticated applications in optics / optical packaging technology. Firstly, an epoxy-based material system for optical chip-to-chip interconnection will be introduced. Secondly, the adaptation of a UV patternable inorganic-organic hybrid material (ORMOCER^®) originally developed for waveguide applications in the data and telecom regime, will be discussed with respect to applications in the visible regime. Spectroscopy and UV-DSC measurements were carried out to investigate the influence of standard photoinitiators on the optical properties for an ORMOCER^® system suitable for microoptic applications. The results show that the resulting material properties were significantly improved by exchange of the initiators compared to the originally incorporated one.

Citation Download Citation

Roland Himmelhuber, Marion Fink, Karl Pfeiffer, Ute Ostrzinski, Anna Klukowska, Gabi Gruetzner, Ruth Houbertz, and Herbert Wolter "Innovative materials tailored for advanced micro-optic applications", Proc. SPIE 6478, Photonics Packaging, Integration, and Interconnects VII, 64780E (9 February 2007); https://doi.org/10.1117/12.715056

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE