Paper
10 October 2007 Optical fiber Bragg grating used in the sensing of surface plasmon resonance
Pavel Tománek, Lubomír Grmela, Pavel Škarvada
Author Affiliations +
Proceedings Volume 6716, Optomechatronic Sensors and Instrumentation III; 67160K (2007) https://doi.org/10.1117/12.754222
Event: International Symposium on Optomechatronic Technologies, 2007, Lausanne, Switzerland
Abstract
We introduce two types of optical fiber Bragg grating sensor with nanoscale spatial resolution and chemical specificity. This sensing technique holds promise for gaining deeper insight into the functionality of nanoscale structures superposed on the gold thin film or embedded in its complex environments. The techniques are based on the effect of surface plasmon resonance and surface plasmon resonance fluorescence. Properly p-polarized laser light illuminates the Bragg grating and induces a strongly enhanced field at the gold thin film. This is due to the coupling of guided mode of the optical fiber and surface plasmon mode. The laboratory prototype of sensor with linear Bragg grating is used for the measurement of smooth variances in refractive index and a sensor with oblique Bragg grating combined with the Scanning near field optical microscope is used for the measurement of analyte thickness. Here, the spatial resolution is determined by the tip size (typically on the order of 60-80 nm).
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Pavel Tománek, Lubomír Grmela, and Pavel Škarvada "Optical fiber Bragg grating used in the sensing of surface plasmon resonance", Proc. SPIE 6716, Optomechatronic Sensors and Instrumentation III, 67160K (10 October 2007); https://doi.org/10.1117/12.754222
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber Bragg gratings

Surface plasmons

Refractive index

Sensors

Optical fibers

Thin films

Dielectrics

Back to Top