Analysis and simulation of an all-fiber polarization transformer

Zhi-Dong Shi; Min-Ning Ji; Jian-Qiang Lin; Huan-Huan Bao; Shu Liu

doi:10.1117/12.783787

17 January 2008 Analysis and simulation of an all-fiber polarization transformer

Zhi-Dong Shi, Min-Ning Ji, Jian-Qiang Lin, Huan-Huan Bao, Shu Liu

Proceedings Volume 6723, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment; 67235M (2008) https://doi.org/10.1117/12.783787
Event: 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 2007, Chengdu, China

Abstract

Based on the analysis on the variable coupled-mode equation, we proposed an optimal profile of variably spun rate Q(z) = 0.5tan{arcsin[(z/L)sin(arctan2Q(L)]} to get better performance for all-fiber polarization transformer (AFPT), where Q(z) is normalized spun rate by beat length L_B along the fiber length L. Then, in accordance with the intrinsic structure of AFPT, and in consideration of considering the phase-difference effect, we calculated the Jones vector from point to point along fiber to simulate the evolution of state of polarization (SOP) in AFPT with this optimal spun rate profile. For comparison, calculations are also made with other two kinds of spun rate profile (linear, cosine) often used in the AFPT fabricating process. The Influence of spun rate variation profile on the polarization transforming performance of AFPT is discussed and compared in detail. It is found that both in the case of linear-in/circular-out where the extinction ratio of output light is required as small as possible and in the case of circular-out/linear-in where the extinction ratio of output light is required as large as possible, the AFPT with optimal spun-rate profile presents best performance, and the linear spun-rate profile is the worst. The analysis and calculation results have referential values to the design, fabrication and evaluation of AFPT samples.

Citation Download Citation

Zhi-Dong Shi, Min-Ning Ji, Jian-Qiang Lin, Huan-Huan Bao, and Shu Liu "Analysis and simulation of an all-fiber polarization transformer", Proc. SPIE 6723, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 67235M (17 January 2008); https://doi.org/10.1117/12.783787

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available