Flexible enclosure for fluidic sealing of microcomponents

Takaya Ueda; Bonnie L. Gray; Yuchun Chen; Paul Li

doi:10.1117/12.763766

12 February 2008 Flexible enclosure for fluidic sealing of microcomponents

Takaya Ueda, Bonnie L. Gray, Yuchun Chen, Paul Li

Author Affiliations +

Proceedings Volume 6886, Microfluidics, BioMEMS, and Medical Microsystems VI; 68860P (2008) https://doi.org/10.1117/12.763766
Event: MOEMS-MEMS 2008 Micro and Nanofabrication, 2008, San Jose, California, United States

Abstract

A flexible enclosure for fluidic sealing of SU-8 microcomponents was developed using polydimethylsiloxane (PDMS). The flexible enclosure can be mechanically assembled to SU-8 microchannels even in the presence of liquid. The seal is mechanical and completely reversible, thus allowing the channels to already contain immobilized enzymes or cells prior to assembly. To provide such a reversible fluid tight lid, the PDMS and SU-8 substrates contain interlocking structures that facilitate assembly and sealing together of the two substrates. Interlocking 1 mm ridges/holes and 400 μm ridges/grooves were fabricated on PDMS and SU-8 surfaces that hold the two pieces in place to prevent PDMS lid and SU-8 microchannels separation during handling and fluid flow. Furthermore, a 20 μm bump on the PDMS surface, which has the same width and length dimensions as the 400 μm deep SU-8 microchannel, acts as a plug to keep the fluid within the microchannel and prevent leakage between the PDMS-SU-8 interface. The assembled microchannels and enclosures can withstand manually applied fluidic pressure via a syringe which is noticeably higher than channels with a simple lid and no interconnect structures. The device was additionally quantified for pressure versus flow rate using a syringe pump and pressure sensor. The seal remained leak free up to 0.6 ml/min and 2.36 kPa. In addition, a preliminary cell viability test was conducted with leukemia cells and we observed that cells lived in the channel microenvironment for 24 hours.

Citation Download Citation

Takaya Ueda, Bonnie L. Gray, Yuchun Chen, and Paul Li "Flexible enclosure for fluidic sealing of microcomponents", Proc. SPIE 6886, Microfluidics, BioMEMS, and Medical Microsystems VI, 68860P (12 February 2008); https://doi.org/10.1117/12.763766

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE