Piezoelectric energy harvesting from an L-shaped beam-mass structure

Alper Erturk; Jamil M. Renno; Daniel J. Inman

doi:10.1117/12.776211

18 April 2008 Piezoelectric energy harvesting from an L-shaped beam-mass structure

Alper Erturk, Jamil M. Renno, Daniel J. Inman

Author Affiliations +

Proceedings Volume 6928, Active and Passive Smart Structures and Integrated Systems 2008; 69280I (2008) https://doi.org/10.1117/12.776211
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2008, San Diego, California, United States

Abstract

Cantilevered piezoelectric harvesters have been extensively considered in the energy harvesting literature. Mostly, a traditional cantilevered beam with one or more piezoceramic layers is located on a vibrating host structure. Motion of the host structure results in vibrations of the harvester beam and that yields an alternating voltage output. As an alternative to classical cantilevered beams, this paper presents a novel harvesting device; a flexible L-shaped beam-mass structure that can be tuned to have a two-to-one internal resonance to a primary resonance ω₂ ≅ 2ω₁ which is not possible for classical cantilevers). The L-shaped structure has been well investigated in the literature of nonlinear dynamics since the two-to-one internal resonance, along with the consideration of quadratic nonlinearities, may yield modal energy exchange (for excitation frequency ω≅ ω₁or the so-called saturation phenomenon (for ω≅ω₂). As a part of our ongoing research on piezoelectric energy harvesting, we are investigating the possibility of improving the electrical outputs in energy harvesting by employing these features of the L-shaped structure. This paper aims to introduce the idea, describes the important features of the L-shaped harvester configuration and develops a linear distributed parameter model for predicting the electromechanically coupled response. In addition, this work proposes a direct application of the L-shaped piezoelectric energy harvester configuration for use as landing gears in unmanned air vehicle applications.

Citation Download Citation

Alper Erturk, Jamil M. Renno, and Daniel J. Inman "Piezoelectric energy harvesting from an L-shaped beam-mass structure", Proc. SPIE 6928, Active and Passive Smart Structures and Integrated Systems 2008, 69280I (18 April 2008); https://doi.org/10.1117/12.776211

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE