Paper
30 April 2008 Application of solid phase direct write (SPDW) via scanning force microscopy for electrical devices and sensors
Author Affiliations +
Abstract
Solid phase direct-write (SPDW) patterning is a promising technique for nanoscale device fabrication. It enables the deposition of a range of materials with the precision and relatively low cost inherent in scanning force microscopy. The ability to deposit controlled 2D and 3D patterns at the nanometer scale and image them with the same instrument adds versatility to nanodevice design and fabrication. This technique works by loading an atomic force microscopy tip with a solid phase "ink" then reversing the process to write a pattern. Linewidths between 40nm and 500nm can be written, with the dimension varied by user specified parameters. To date, four materials have been successfully deposited: carbon, silicon, tungsten oxide and molybdenum oxide. This report presents an overview of SPDW and its application to the direct write fabrication of electronic devices.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Patrick S. Spinney, Scott D. Collins, and Rosemary L. Smith "Application of solid phase direct write (SPDW) via scanning force microscopy for electrical devices and sensors", Proc. SPIE 6959, Micro (MEMS) and Nanotechnologies for Space, Defense, and Security II, 69590J (30 April 2008); https://doi.org/10.1117/12.777809
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Carbon

Diodes

Gold

Atomic force microscopy

Oxides

Tungsten

Etching

Back to Top