Paper
28 October 2009 Erbium-doped photonic crystal fiber laser
Haili Yang, Shuangchen Ruan, Yongqin Yu, Hang Zhou
Author Affiliations +
Abstract
We have demonstrated a low threshold all fiber laser based on a 9.68 m-long small core Erbium doped photonic crystal fiber (PCF) and also presented results from two separate device experiments. The threshold and maximum output power of the laser are 6.72 mW and 82.6 mW, respectively. Fiber loop mirrors is used as resonator mirrors. The overall system is all-fibered and with low threshold. The PCF we used as gain medium with 9.68 m long, 3.34 μm mode diameter, 0.143 numerical aperture, 1000 ppm doped concentration, 545 dB/km transmission attenuation coefficient to 1310 nm laser. A single-mode diode laser, centered at 980 nm, was used as pump source and the maximum power was 400 mW.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Haili Yang, Shuangchen Ruan, Yongqin Yu, and Hang Zhou "Erbium-doped photonic crystal fiber laser", Proc. SPIE 7514, Photonics and Optoelectronics Meetings (POEM) 2009: Fiber Optic Communication and Sensors, 75140H (28 October 2009); https://doi.org/10.1117/12.843446
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Laser damage threshold

Mirrors

Photonic crystal fibers

Absorption

Fiber optic communications

Laser crystals

Back to Top