Paper
19 July 2010 Choosing a control system for CCAT
D. L. Terrett, Patrick Wallace, Alan Bridger, Dennis Kelly
Author Affiliations +
Abstract
The Cornell Caltech Atacama Telescope1 is a 25m aperture sub-millimeter wavelength telescope to be built in northern Chile at an altitude of 5600m. Like any modern telescope, CCAT will require a powerful and comprehensive control system; writing one from scratch is not affordable, so the CCAT TCS must be based, at least in part, on existing software. This paper describes how the search for a suitable system (or systems) was carried out, looks at the criteria used to judge the feasibility of various approaches to developing the new system, and suggests the further studies needed to validate the choices. Although the purpose of the study was to find a control system for a specific telescope with its own particular technical requirements, many of the factors considered, such as maintainability, the ability to adapt to new requirements in the future and so on, are of concern to all telescopes. Consequently, the processes used to select the system for CCAT are relevant to other projects faced with the same decision, even if the conclusions turn out to be different.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
D. L. Terrett, Patrick Wallace, Alan Bridger, and Dennis Kelly "Choosing a control system for CCAT", Proc. SPIE 7740, Software and Cyberinfrastructure for Astronomy, 774028 (19 July 2010); https://doi.org/10.1117/12.856371
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Control systems

Telescopes

Observatories

Interfaces

LabVIEW

Prototyping

Control systems design

RELATED CONTENT

Control software for the AO modules of the AOF project
Proceedings of SPIE (July 06 2018)
Using NTT as prototype for VLT the new NTT...
Proceedings of SPIE (March 21 1997)
ASM a scaled down Active Segmented Mirror for the...
Proceedings of SPIE (July 17 2008)
APT: the phase I tool for HST cycle 12
Proceedings of SPIE (January 02 2002)

Back to Top