Paper
10 May 2011 Improved flaw detection and characterization with difference thermography
Author Affiliations +
Abstract
Flaw detection and characterization with thermographic techniques in graphite polymer composites is often limited by localized variations in the thermographic response. Variations in properties such as acceptable porosity, variations in fiber volume content and surface polymer thickness result in variations in the thermal response that in general cause significant variations in the initial thermal response. These variations result in a noise floor that increases the difficulty of detecting and characterizing deeper flaws. The paper investigates comparing thermographic responses taken before and after a change in state in a composite to improve the detection of subsurface flaws. A method is presented for registration of the responses before finding the difference. A significant improvement in the detectability is achieved by comparing the differences in response. Examples of changes in state due to application of a load and impact are presented.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
William P. Winfree, Joseph N. Zalameda, and Patricia A. Howell "Improved flaw detection and characterization with difference thermography", Proc. SPIE 8013, Thermosense: Thermal Infrared Applications XXXIII, 80130U (10 May 2011); https://doi.org/10.1117/12.883472
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Composites

Thermography

Image registration

Resistance

Infrared radiation

Polymers

Infrared imaging

Back to Top