Alignment and testing of the NIRSpec filter and grating wheel assembly

Thomas Leikert; Torsten Gross; Hans-Ulrich Wieland; Kai Weidlich

doi:10.1117/12.893465

12 September 2011 Alignment and testing of the NIRSpec filter and grating wheel assembly

Thomas Leikert, Torsten Gross, Hans-Ulrich Wieland, Kai Weidlich

Proceedings Volume 8131, Optical System Alignment, Tolerancing, and Verification V; 81310L (2011) https://doi.org/10.1117/12.893465
Event: SPIE Optical Engineering + Applications, 2011, San Diego, California, United States

Abstract

In order to perform spectrometric measurements, the Near Infrared Spectrometer (NIRSpec) aboard the James Webb Space Telescope (JWST) needs the ability to select various spectral band widths and split these up into its comprised wavelengths. These functions are achieved by the Filter Wheel Assembly (FWA) and the Grating Wheel Assembly (GWA). The filters of the FWA select a different bandwidth of the spectrum each while the gratings on the GWA yield specific diffractive characteristic for spectral segmentation. A high spectral sensitivity as well as the ability to detect the spectra of various objects at the same time result in high requirements regarding the positioning accuracy of the optics of both mechanisms in order to link the detected spectra to the 2-dimensional images of the observed objects. The NIRSpec mechanism including FWA and GWA will operate at temperature levels below 42K which are established during testing inside of a cryostat. However the alignment and testing of these mechanisms requires a lot of thought since there is very limited access to the item under test within such a device. Alignment needs to be preloaded based on simulations and testing is reduced to optical methods and evaluation of electrical signals. This paper describes the methods used for the various alignment steps, the corresponding tests and their precision of measurement as well as the achieved accuracies in the mechanism performance.

Citation Download Citation

Thomas Leikert, Torsten Gross, Hans-Ulrich Wieland, and Kai Weidlich "Alignment and testing of the NIRSpec filter and grating wheel assembly", Proc. SPIE 8131, Optical System Alignment, Tolerancing, and Verification V, 81310L (12 September 2011); https://doi.org/10.1117/12.893465

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available