Progress in EUV lithography towards manufacturing from an exposure tool perspective

Jan V. Hermans; David Laidler; Philippe Foubert; Koen D'havé; Shaunee Cheng; Mircea Dusa; Eric Hendrickx

doi:10.1117/12.917616

13 March 2012 Progress in EUV lithography towards manufacturing from an exposure tool perspective

Jan V. Hermans, David Laidler, Philippe Foubert, Koen D'havé, Shaunee Cheng, Mircea Dusa, Eric Hendrickx

Author Affiliations +

Proceedings Volume 8322, Extreme Ultraviolet (EUV) Lithography III; 832202 (2012) https://doi.org/10.1117/12.917616
Event: SPIE Advanced Lithography, 2012, San Jose, California, United States

Abstract

EUV lithography is a candidate for device manufacturing for the 16nm node and beyond. To prepare for insertion into manufacturing, the challenges of this new technology need to be addressed. Therefore, the ASML NXE:3100 preproduction tool was installed at imec replacing the ASML EUV Alpha Demo Tool (ADT). Since the technology has moved to a pre-production phase, EUV technology has to mature and it needs to meet the strong requirements of sub 16nm devices. We discuss the CD uniformity and overlay performance of the NXE:3100. We focus on EUV specific contributions to CD and overlay control, that were identified in earlier work on the ADT. The contributions to overlay originate from the use of vacuum technology and reflective optics inside the scanner, which are needed for EUV light transmission and throughput. Because the optical column is in vacuum, both wafer and reticle are held by electrostatic chucks instead of vacuum chucks and this can affect overlay. Because the reticle is reflective, any reticle (clamp) unflatness directly translates into a distortion error on wafer (non-telecentricity). For overlay, the wafer clamping performance is not only determined by the exposure chuck, but also by the wafer type that is used. We will show wafer clamping repeatability with different wafer types and discuss the thermal stability of the wafer during exposure.

Citation Download Citation

Jan V. Hermans, David Laidler, Philippe Foubert, Koen D'havé, Shaunee Cheng, Mircea Dusa, and Eric Hendrickx "Progress in EUV lithography towards manufacturing from an exposure tool perspective", Proc. SPIE 8322, Extreme Ultraviolet (EUV) Lithography III, 832202 (13 March 2012); https://doi.org/10.1117/12.917616

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE