CMOS compatible low-frequency aluminium nitride MEMS piezoelectric energy harvesting device

N. Jackson; R. O'Keeffe; M. O'Neill; F. Waldron; A. Mathewson

doi:10.1117/12.2016469

17 May 2013 CMOS compatible low-frequency aluminium nitride MEMS piezoelectric energy harvesting device

N. Jackson, R. O'Keeffe, M. O'Neill, F. Waldron, A. Mathewson

Proceedings Volume 8763, Smart Sensors, Actuators, and MEMS VI; 87631I (2013) https://doi.org/10.1117/12.2016469
Event: SPIE Microtechnologies, 2013, Grenoble, France

Abstract

Piezoelectric materials are widely used in various applications including sensors, actuators, and energy harvesting devices. Energy harvesting devices can be used to power autonomous wireless sensors that are placed in remote or difficult to reach areas, where replacing a battery is not practical or feasible. In this paper the authors present work on the fabrication and design of a CMOS compatible Aluminium Nitride (AlN) piezoelectric based MEMS cantilever structure for harvesting vibrational energy. In order for AlN to be piezoelectric it needs to be highly structured in the c-axis (002) crystal orientation. The deposition of highly structured AlN and its polarity is dependent on the underlying films and their crystal orientation. XRD rocking curve results from this paper show a highly oriented (002) AlN film with a FWHM value of 2.1°. The MEMS cantilever structures were fabricated using standard MEMS fabrication techniques using SOI wafers. By optimising the AlN material deposition process and the stress values in the cantilever structures the authors were able obtain a power density of 2.55 mW/ cm³/g² for a single MEMS structure with 500 nm thick AlN. The cantilever structure had a resonant frequency of approximately 150 Hz. In this paper the authors also investigated methods to increase the bandwidth of the cantilever structures, by building an array of devices with slightly varying length masses.

Citation Download Citation

N. Jackson, R. O'Keeffe, M. O'Neill, F. Waldron, and A. Mathewson "CMOS compatible low-frequency aluminium nitride MEMS piezoelectric energy harvesting device", Proc. SPIE 8763, Smart Sensors, Actuators, and MEMS VI, 87631I (17 May 2013); https://doi.org/10.1117/12.2016469

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available