Paper
6 September 2013 Surface profile measurement of a diffraction grating by a laser beam scanning interferometer using sinusoidal phase modulation
Osami Sasaki, Takuya Kubota, Samuel Choi, Takamasa Suzuki
Author Affiliations +
Abstract
It is difficult in interferometric metrology to maintain high spatial resolution over a large measurement region. In this paper this characteristic is achieved by scanning two focused laser beams of about 6 microns diameter over an object surface and a reference mirror surface, respectively, with a rotating mirror, a lens, and a polarization beam splitter. An electric-optic phase modulator generates the phase difference of a sinusoidal waveform of 10 MHz between the two focused beams to calculate the phase of the interference signal. Because the beam focused onto a diffraction grating of 50 microns period is not diffracted strongly, a surface profile of the grating can be exactly measured by this interferometer over the measurement region of 16 mm with the spatial resolution of 2 microns.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Osami Sasaki, Takuya Kubota, Samuel Choi, and Takamasa Suzuki "Surface profile measurement of a diffraction grating by a laser beam scanning interferometer using sinusoidal phase modulation", Proc. SPIE 8839, Dimensional Optical Metrology and Inspection for Practical Applications II, 883906 (6 September 2013); https://doi.org/10.1117/12.2025328
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Interferometers

Signal detection

Diffraction gratings

Polarization

Spatial resolution

Beam splitters

Back to Top