Derivation of tree stem structural parameters from static terrestrial laser scanning data

Wei Tian; Yi Lin; Yajing Liu; Zheng Niu

doi:10.1117/12.2068571

17 November 2014 Derivation of tree stem structural parameters from static terrestrial laser scanning data

Wei Tian, Yi Lin, Yajing Liu, Zheng Niu

Author Affiliations +

Proceedings Volume 9262, Lidar Remote Sensing for Environmental Monitoring XIV; 92620Z (2014) https://doi.org/10.1117/12.2068571
Event: SPIE Asia-Pacific Remote Sensing, 2014, Beijing, China

Abstract

Accurate tree-level characteristic information is increasingly demanded for forest management and environment protection. The cutting-edge remote sensing technique of terrestrial laser scanning (TLS) shows the potential of filling this gap. This study focuses on exploring the methods for deriving various tree stem structural parameters, such as stem position, diameter at breast height (DBH), the degree of stem shrinkage, and the elevation angle and azimuth angle of stem inclination. The data for test was collected with a Leica HDS6100 TLS system in Seurasaari, Southern Finland in September 2010. In the field, the reference positions and DBHs of 100 trees were measured manually. The isolation of individual trees is based on interactive segmentation of point clouds. The estimation of stem position and DBH is based on the schematic of layering and then least-square-based circle fitting in each layer. The slope of robust fit line between the height of each layer and DBH is used to characterize the stem shrinkage. The elevation angle of stem inclination is described by the angle between the ground plane and the fitted stem axis. The angle between the north direction and the fitted stem axis gives the azimuth angle of stem inclination. The estimation of the DBHs performed with R square (R²) of 0.93 and root mean square error (RMSE) of 0.038m.The average angle corresponding to stem shrinkage is -1.86°. The elevation angles of stem inclinations are ranged from 31° to 88.3°. The results have basically validated TLS for deriving multiple structural parameters of stem, which help better grasp tree specialties.

Citation Download Citation

Wei Tian, Yi Lin, Yajing Liu, and Zheng Niu "Derivation of tree stem structural parameters from static terrestrial laser scanning data", Proc. SPIE 9262, Lidar Remote Sensing for Environmental Monitoring XIV, 92620Z (17 November 2014); https://doi.org/10.1117/12.2068571

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE