Paper
12 August 2015 Fabrication of screen printed optoelectronic CdS/CdTe device
Ali Imran, Jianliang Jiang, S. Naseem, Afifa Sadaqat, M. Khalid Khan
Author Affiliations +
Proceedings Volume 9624, 2015 International Conference on Optical Instruments and Technology: Micro/Nano Photonics and Fabrication; 96240H (2015) https://doi.org/10.1117/12.2193560
Event: International Conference on Optical Instruments and Technology 2015, 2015, Beijing, China
Abstract
II-VI semiconductors have great importance in the fabrication and application of optoelectronic devices. CdTe is one of the most promising materials among photovoltaic materials. In this research work CdS/CdTe solar cell has been prepared using screen printing and sintering technique. Various factors affecting the surface morphology of CdS window layer were also investigated. Optical Microscopy, Scanning Electron Microscopy and Electrical characterization proved that best results can be achieved by increasing the sintering duration, the Mesh number and by CdCl2 doping. CdS/CdTe solar cell with an area of 8.8 cm2 was prepared. The Fill Factor was calculated to be 0.51, with Voc = 0.56 V and Isc = 31.5 mA. The efficiency was also measured and found to be 1.02%.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ali Imran, Jianliang Jiang, S. Naseem, Afifa Sadaqat, and M. Khalid Khan "Fabrication of screen printed optoelectronic CdS/CdTe device", Proc. SPIE 9624, 2015 International Conference on Optical Instruments and Technology: Micro/Nano Photonics and Fabrication, 96240H (12 August 2015); https://doi.org/10.1117/12.2193560
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cadmium sulfide

Solar cells

Annealing

Particles

Scanning electron microscopy

Doping

Photomicroscopy

Back to Top